System Menu
6-68 ADVANCED OPERATION GUIDE
4
Press [OK].
Auto Error Clear
If an error occurs during printing, the print job stops to wait for the next step
to be taken by the user. In the Auto Error Clear mode, automatically clear
the error after a set amount of time elapses.
The following errors are automatically cleared.
Print overrun
Memory is full
Auto Error Clear ON/OFF
Select whether to use Auto Error Clear or not.
1
Press the System Menu key.
2
Press [T], [Date/Timer] and then [Change] of Auto Error Clear.
3
Press [Off] or [On].
4
Press [OK].
Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before
automatically clearing errors. Options are between 5 and 495 seconds
(every five seconds).
NOTE: If you select [Off] for Auto Error Clear, the time display does not
appear.
1
Press the System Menu key.
2
Press [T], [Date/Timer] and then [Change] of Error Clear Timer.
Date/Timer - Auto Error Clear
Cancel OK
Status 10/5/2006 10:10
If an error occurs, automatically clear it after
a set amount of time elapses.
OnOff
To Next Page
Loading...
Need help?
General
