System Menu
6-64 ADVANCED OPERATION GUIDE
Date/Timer
Date/Timer settings include:
• Date/Time …6-64
•Time Zone …6-64
• Date Format …6-65
• Auto Panel Reset …6-65
• Auto Sleep …6-66
• Auto Error Clear …6-68
NOTE: If user login administration is valid, only administrators can
change Date/Timer settings.
Date/Time
Set the date and time for the location where you use the machine. If you
perform Send as E-mail, the date and time set here will be displayed on the
header.
CAUTION: Be sure to set Time Zone before the Date/Time setup.
1
Press the System Menu key.
2
Press [T], [Date/Timer] and then [Change] of Date/Time.
3
Press [+] or [–] to
enter the date and
time respectively.
NOTE: Set year (Y), month (M), date (D), hour (H), minute (M), and
second (S).
4
Press [Off] or [On] of Summer Time and press [OK].
Time Zone
Set the time difference in the location you are from GMT.
Date/Timer - Date/Time
Set the date and time.
Cancel OK
Status 10/5/2006 10:10
Off
DMY
SMH
On
Summer Time
To Next Page
Loading...
Need help?
General
