Utax CD 1230

System Menu
ADVANCED OPERATION GUIDE 6-35
Copy Settings
The following settings are available for copying functions.
• Border Erase to Back Page …6-35
• Paper Selection …6-36
• Auto Paper Selection …6-36
• Auto % Priority …6-37
• Preset Limit …6-37
• Quick Setup Registration …6-38
NOTE: If user login administration is valid, only administrators can
change copy settings.
Border Erase to Back Page
Select the Border Erase Method for Back of Page.
NOTE: Refer to page 1-26 and page 2-27 for Border Erase.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Border Erase to Back Page.
3
Press [Same as
Front Page] or [Do
not Erase].
4
Press [OK].
Item Description
Same as Front Page Border Erase performed in the same
setting as the front page
Do not Erase No Border Erase performed on the back
page
Copy - Border Erase to Back Page
Cancel OK
Status 10/5/2006 10:10
Select the border erase method
for back of page.
Do Not EraseSame as
Front Page