Security
8-8 ADVANCED OPERATION GUIDE
System Initialization
Erase entire hard disk. Initialization should be performed while the
machine stands by.
CAUTION: If you accidentally turn the main power switch off during
initialization, the hard disk might possibly crash or initialization might fail.
NOTE: If you accidentally turn the main power switch off during
initialization, turn the main power switch on again. Initialization
automatically restarts.
1
Press the System Menu key.
2
Press [T] and then [Security].
3
If the user login screen appears, enter the user name and password, and
press [Login].
If the user authentication screen does not appear, go to Step 5.
4
Enter the default security password, 000000.
5
Press [Execute] of
System Initialization.
6
Press [Yes] on the screen to confirm the initialization. Initialization starts.
7
When the screen appears to show initialization completed, press the
Power key, check that the Power key and memory indicators are OFF,
and turn the main power switch off and then on.
Security
Status 10/5/2006 10:10
Data Overwrite Method:
Change
Close
Change
Execute
Security Password:
System Initialization:
To Next Page
Loading...
Need help?
General
