System Menu
6-58 ADVANCED OPERATION GUIDE
Adjustment/Maintenance
Adjust printing quality and conduct machine maintenance.
• Copy Density Adjustment …6-58
• Print Density …6-58
• Send/Box Density Adjust …6-59
• Drum Refresh …6-60
• Correcting Fine Black Line …6-60
• Charger Auto Cleaning …6-61
• Display Brightness …6-62
• Silent Mode …6-62
• System Initialization …6-63
NOTE: If user login administration is valid, only administrators can
change adjustment/maintenance.
Copy Density Adjustment
Adjust copy density. Adjustment can be made in 7 scales both in auto and
manual density modes.
1
Press the System Menu key.
2
Press [T], [Adjustment/Maintenance] and [Change] of Copy Density
Adjustment.
3
Press [Change] of Auto for auto density mode or of Manual for manual
density mode.
4
Press [-3] - [+3]
(Lighter-Darker) to
adjust density.
5
Press [OK].
Print Density
Adjust print density. Adjustment can be made in 5 scales.
Adjustment/Maintenance - Manual
Adjust the default copy density for manual mode.
3
Cancel OK
Status 10/5/2006 10:10
Lighter
-3
Normal Darker
-2 -1 +10 +3+2
To Next Page
Loading...
Need help?
General
