System Menu
ADVANCED OPERATION GUIDE 6-19
3
Press [Change] at
the error you wish to
change what to do
about it.
4
Select what to do about errors and press [OK].
Output Tray
Select output tray respectively for copy jobs, print jobs from Custom Box,
computers, and FAX RX data. The options are as follows.
NOTE: Optional job separator, document finisher, 3000 sheet document
finisher, and Mailbox are required.
FAX RX data output can be specified when the optional fax kit.
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of Output Tray.
3
Press [Change] of Copy/Custom Box, Printer, or FAX.
Common Settings - Error Handling
Change
Duplexing Paper Error:
Display Error
Change
Change
Change
Change
No Staple Error:
Not Stapling
Punch Waste Full Error:
Not Punching
End
End 10/5/2006 10:10
Staple Paper Error:
Not Stapling
Stapling Limit Error:
Not Stapling
Output Tray Descriptions
Top Tray Delivered on Top Tray of the machine.
Finisher Tray Delivered on Tray set to the optional
document finisher or built-in finisher.
Tray A, Tray B*, Tray C*
* Select [Face Up] (print surface up) or [Face Down] (print surface
down) for paper orientation at output.
Delivered on Tray A-C of the optional 3000
sheet document finisher.
Job Separator Delivered on the optional job separator.
Tray 1-7 * Delivered on Tray 1-7 (1: uppermost) of the
optional Mailbox.
To Next Page
Loading...
Need help?
General
