Sending Functions
ADVANCED OPERATION GUIDE 2-11
1-sided/2-sided Selection
Select the type and binding of original depending on the original.
NOTE: To scan colored 2-sided originals using the optional document
processor, you need to add memory to the machine. Contact to your
service representative.
1
Press the Send key.
2
Press [Type of Original/Transmission] and then [2-sided/Book Original]
3
Press [1-sided], [2-
sided], or [Book].
4
When you select [2-sided] or [Book], also select the binding and the setting
orientation of original.
5
Press [OK].
6
Specify the destination, and press the Start key to start sending.
Original Type Binding
1-sided Sheet Original 1-sided —
2-sided Sheet Original 2-sided*
* Only when the optional document processor is used.
Binding Left/Right,
Binding Top
Open Book Original such
as magazine and book
Book Binding Left,
Binding Right
Status 10/5/2006 10:10
Ready to send.
Press [OK] to display
Destination
1
1-sided
2-sided/Book Original
Place original.
2-sided
Book
RightLeft
Binding
Top Edge Top
Original
Orientation
Cancel OKAdd Shortcut
the image.
To Next Page
Loading...
Need help?
General
