Status / Job Cancel
5-14 ADVANCED OPERATION GUIDE
Device/Communication
Check the status or configure the devices/lines installed or connected to
this machine.
Displaying Device/Communication Screen
1
Press the Status/Job Cancel key.
2
Press [Device/Communication]
The screen to check the status or configure the devices is displayed.
Check of Device Status
Scanner
The status of original scanning in the document processor (optional) or the
error information (paper jam, opened cover, etc.) is displayed.
Printer
The error information such as paper jam, out of toner, and out of paper, and
the status such as waiting and printing are displayed.
Hard Disk
The information such as formatting, overwriting for erasure, and error
occurrence is displayed.
FAX Backup Memory
Usage and Capacity of the backup memory are displayed.
Detail
Scanner
Printer
Removable Memory
Hard Disk
FAX Backup Memory
Memory Card
Ready .
Ready .
Safely removable.
Error has occurred.
Not connected.
Not connected.
Format Remove
Display
Error
Format Printing list
FAX Line 1
Communicating…
Line Off Manual RX
FAX Log
Printing Jobs Sending Jobs Storing Jobs
Device/
Communication
Paper/Supplies
Log Executing TX job . 10/5/2006 10:10