Status / Job Cancel
ADVANCED OPERATION GUIDE 5-15
Configuring the Devices
Removable Memory (USB Memory)
• The usage and capacity of the external media connected to this
machine are displayed.
• Press [Format] to format external media.
• Press [Remove] to safely remove the external media. For details, refer
to Removing the USB Memory in the next section.
FAX Line 1
• The information such as sending/receiving and dialing is displayed.
• Press [Line Off] to cancel the FAX in sending/receiving. For details,
refer to Canceling FAX Communication on page 5-16 in the section
afterwards.
• Press [Manual RX] to start FAX. Use this function when you want to
talk to the sender before receiving the FAX originals. For details, refer
to the Operation Guide of FAX kit.
• Press [Log] to display the transmission history of FAX. For details,
refer to the Operation Guide of FAX kit.
Memory Card (memory for printer, Compact Flash)
• The information such as cannot recognize or unconnected and the
usage/capacity of memory card are displayed.
• Press [Format] to format the memory card.
• Press [Printing list] to print the partition list. For details, refer to Print of
Partition List.
Removing the USB Memory
Remove the USB memory.
1
Press the Status/Job Cancel key.
Detail
Scanner
Printer
Removable Memory
Hard Disk
FAX Backup Memory
Memory Card
Ready .
Ready .
Safely removable.
Error has occurred.
Not connected.
Not connected.
Format Remove
Display
Error
Format Printing list
FAX Line 1
Communicating…
Line Off Manual RX
FAX Log
Printing Jobs Sending Jobs Storing Jobs
Device/
Communication
Paper/Supplies
Log Executing TX job . 10/5/2006 10:10
To Next Page
Loading...
Need help?
General
