System Menu
ADVANCED OPERATION GUIDE 6-43
Printer Settings
Printing from computers, settings are generally made on the application
software screen. The following settings are available for configuring the
defaults to customize the machines.
• Printer Emulation …6-43
• Resolution …6-43
• EcoPrint …6-44
• KIR …6-44
• Override A4/Letter …6-45
• Duplex …6-45
• Copies …6-46
• Orientation …6-47
• Wide A4 …6-47
• Form Feed Timeout …6-48
• LF Action …6-48
• CR Action …6-49
Printer Emulation
Set emulation options to run the machine by the commands for other
printers. Refer to Emulation on page 3-4 for the setting method.
Resolution
Select default resolution from Fast1200, 600 dpi, or 300 dpi.
NOTE: Fast1200 is our original resolution mode, in which photo and
other graphic halftone can be reproduced much better than 600 dpi.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Resolution.
3
Press [Fast1200],
[600dpi], or [300dpi].
Printer - Resolution
Select default resolution.
Fast1200300dpi 600dpi
Cancel OK
Status 10/5/2006 10:10
To Next Page
Loading...
