Utax CD 1230 User Manual

Sending Functions
2-14 ADVANCED OPERATION GUIDE
File Format
Select the file format of the image to send.
NOTE: When the color mode in scanning has been selected for
Grayscale or Full Color, you can adjust the image quality Regarding color
mode, refer to Color / Grayscale / Monochrome Selection on page 2-24.
When the optional PDF upgrade kit has been installed, you can use PDF
encryption functions. For details, refer to the following PDF Encryption
Functions.
1
Press the Send key.
2
Press [Type of Original/Transmission] and then [File Format].
3
Select the file format from [PDF], [TIFF], [JPEG], and [High Comp. PDF].
When the color
mode in scanning
has been selected
for Grayscale or Full
Color, set the image
quality.
4
Press [OK].
5
Specify the destination, and press the Start key to start sending.
File Format
Adjustable range of image
quality
Color mode
PDF 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
Full Color, Grayscale,
Monochrome
TIFF 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
Full Color, Grayscale,
Monochrome
JPEG 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
Full Color, Grayscale
High Comp.
PDF *
* Only when the optional PDF upgrade kit is installed.
1 Compression Ratio Priority
to 3 Quality Priority
Full Color
Status 10/5/2006 10:10
Place original.
Cancel OKAdd Shortcut
Ready to send.
Press [OK] to display
Image Quality
File Format
Destination
Encryption
Low Quality
1
the image.
(High Comp.)
High Quality
(Low Comp.)
Off
TIFF
PDF
JPEG
High Comp.
PDF

Utax CD 1230 Specifications

General

Brand	Utax
Model	CD 1230
Category	All in One Printer
Language	English