Copying Functions
1-56 ADVANCED OPERATION GUIDE
5
Place the originals in the document processor or on the platen. Press the
Start key to start copying and register this job as a Repeat Copy job.
Outputting Repeat Copy Jobs
The Repeat Copy jobs are stored in the document box. Refer to Job
Box on page 4-2 to print out the Repeat Copy jobs.
Maximum Number of Repeat Copy Jobs
You can change the maximum number of Repeat Copy jobs to retain in the
document box.
1
Press the System Menu key.
2
Press [Document Box/Removable Memory] and then [Next] of Job Box.
3
Press [Change] of Repeat Copy Job Retention.
4
Press [+] or [–] to
enter the number of
Repeat Copy jobs to
retain.
5
Press [OK].
6
When exiting, press the Reset key repeatedly to return to the System
Menu default screen.
Status
10/5/2006 10:10
Document Box/Removable Memory - Repeat Copy Job Retention
Cancel OK
Set the maximum number of r epeat copy jobs to retain.
Use [-]/[+] or the number keys to enter a number.
*Set thi s number to 0 to not retain any repeat copy jobs.
(0 - 50)
job(s)
1
To Next Page
Loading...
Need help?
General
