System Menu
6-18 ADVANCED OPERATION GUIDE
No Staple Error
Select what to do when staples run out during printing.
NOTE: The messages are displayed when the optional paper feeders,
built-in finisher or optional 3000 sheet finisher is installed.
Stapling Limit Error
Select what to do when staple capacity is exceeded during printing.
NOTE: The messages are displayed when the optional paper feeders,
built-in finisher or optional 3000 sheet finisher is installed.
Punch Waste Full Error
Select what to do when the punch waste box becomes full during printing.
NOTE: The messages are displayed when the optional 3000 sheet
finisher and punch unit are installed.
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of Error Handling.
Item Description
Not Stapling Printing continues without stapling.
Error Display Error message to cancel printing is
displayed.
Item Description
No Stapling Printing continues without stapling.
Error Display Error message to cancel printing is
displayed
Processing Description
No punching Printing continues without punching.
Error Display Error message to cancel printing is
displayed.
To Next Page
Loading...
Need help?
General
