System Menu
6-6 ADVANCED OPERATION GUIDE
4
Press [On], and then
press [+]/[–] or
numeric keys to
enter X (horizontal)
and Y (vertical)
dimensions.
5
Press [OK].
Adding a Custom Size and Type for Paper to Print
Set up four frequently-used custom paper sizes at maximum. The custom
size options are displayed on the screen to select paper set in the Multi
Purpose tray.
Up to four custom original sizes can be added.
Select type of paper for each paper size.
Type of paper: Plain, Transparencies, Rough, Vellum, Labels, Recycled,
Preprint, Bond, Cardstock, Color, Prepunched, Letterhead, Thick,
Envelope, High Quality, Custom 1-8
NOTE: Refer to Paper Type on page 6-10 for Custom 1- 8 for Paper
Type.
1
Press the System Menu key
2
Press [Common Settings], [Next] of Original/Paper Setup and then [Next]
of Custom Paper Size.
3
Press [Change] of Custom 1 to Custom 4, on which you want to register
the size.
Common Settings - Custom 1
Register a custom original size.
On
X(50 - 432)
420
Off
Cancel OK
Status 10/5/2006 10:10
# Keys
Y(50 - 297)
297
# Keys
Paper is present in Document Processor.
mm
mm
Measurement Dimensions
Inch models H: 5.83 to 17" (in 0.01" increments)
V: 5.86 to 11.69" (in 0.01" increments)
Metric models H: 148 to 432 mm (in 1 mm increments)
V: 98 to 297 mm (in 1 mm increments)
To Next Page
Loading...
