Copying Functions
ADVANCED OPERATION GUIDE 1-9
NOTE: This function is available regardless of whether originals have the
same width or not.
1
Place originals on the document processor.
IMPORTANT: When placing originals of different widths, be sure to flush
them against the document width guide toward the back of the machine.
2
Press the Copy key.
3
Press [Org./Paper/Finishing] and then [Mixed Sized Originals].
4
Select [Mixed Sized
Copies] or [Same
Size Copies] as
finish size.
5
Select [Same Width] or [Different Width] as combination of originals.
When [Same Size Copies] is selected, select [Long Edge Left] or [Short
Edge Left] as the first original orientation.
6
Press [OK].
7
Press the Start key to start copying.
Option Description
Mixed Sized
Copies
Originals are detected individually for size and
copied to the same size papers as originals.
Same Size Copies Originals are all copied to the same size papers.
Status 10/5/2006 10:10
Ready to copy.
Copies
Cancel OK
Mixed Sized Originals
Press [OK] to display
Add Shortcut
Off
Same Width
Mixed Sized
Copies
Same Sized
Copies
Long Edge
Left
Diff Width
Short Edge
Left
Original Direction
Top Page Direction
1
the image.
To Next Page
Loading...
Need help?
General
