Management
ADVANCED OPERATION GUIDE 7-3
4
Press [Next] of User Login Setting and then [Change] of User Login.
5
Select [Local
Authentic.] or
[Network
Authentic.]. Select
[Off] to disable user
login administration.
If you select
[Network
Authentic.], enter
the host name (62
characters or less)
and domain name
(254 characters or less) for the Authentication Server. Select
[NTLM(WinNT)] or [Kerberos(Win2000/2003)] as the authentication
method.
NOTE: If the login user name and password are rejected, check the
following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Clock time setting of the machine and the Authentication Server
If you cannot login because of the setting of the machine, login with any
administrator registered in the local user list and correct the settings.
6
Press [OK].
Login/Logout
If user login administration is enabled, it is necessary to enter the login user
name and password to use the machine.
Login
1
If the screen below
appears during the
operations, press
[Login User Name].
User Login/Job Accounting - User Login
Off
OK
Status
10/5/2006 10:10
Cancel
FTP
Host Name
Domain Name
NTLM
(WinNT)
Kerberos
(Win2000/2003)
User login administration.
Please select authentication method.
Local
Authenti c.
Network
Authenti c.
NTLM
(WinNT)
Login
User Name
Login
Status 10/5/2006 10:10
Enter login user name and password.
Cancel
Login
Password
abcdef
********