Copying Functions
1-30 ADVANCED OPERATION GUIDE
6
If you choose [1-sided >> Booklet] or [2-sided >> Booklet], you can add the
cover. Press [Cover] and select Cover. Press [OK].
7
If the optional 3000 Sheet Document Finisher and the center folding unit
are equipped, [Bind and Fold]* can be selected. Press [Saddle Stitch] and
select [Bind and Fold]. Press [OK]. Up to 16 sheets (64 pages) can be
accomplished with center margin stapling and center folding.
* Capability of stapling finished copies in the center and automatically
folding them in the center.
8
Press [Original Orientation] to choose orientation of the originals, either
[Top Edge Top] or [Top Edge Left]. Then press [OK].
9
Press [OK].
10
Place the originals in the document processor or on the platen and press
the Start key.
NOTE: When using the platen, be sure to place the original in page
order.
If the original is placed on the platen, replace the original and press the
Start key.
After scanning all originals, press [Scan Finish] to start copying.
To Next Page
Loading...
Need help?
General
