Manual 37443A DSLC-2 - Digital Synchronizer and Load Control
© Woodward Page 55/226
Configure The DSLC-2 With ToolKit
The following figure shows an example configuration screen of ToolKit:
Figure 3-3: ToolKit - configuration screen
Entering a new value or selecting a value from a defined list will change the value in a field. The new value is
written to the controller memory by changing to a new field or pressing the Enter key.
Navigation through the various configuration and visualization screens is performed by clicking on the
and icons, by selecting a navigation button (e.g. ) or by selecting a screen from the drop-down list to
the right of the arrow icons.
To Next Page
Loading...
