Manual 37443A DSLC-2 - Digital Synchronizer and Load Control
Page 86/226 © Woodward
Menu 5.2 – System Management
This menu contains the parameters for the system management of the DSLC-2.
Figure 3-21: ToolKit – system management
Password System
The DSLC-2 utilizes a password protected multi-level configuration access hierarchy. This permits varying de-
grees of access to the parameters being granted by assigning unique passwords to designated personnel. A dis-
tinction is made between the access levels as follows:
Code level CL0 (User Level) Standard password = none
This code level permits for monitoring of the system and limited access to the parameters. Configuration of the
control is not permitted. The unit powers up in this code level.
Code level CL1 (Service Level) Standard password = "
0 0 0 1"
This code level entitles the user to change selected non-critical parameters. The user may also change the pass-
word for level CL1. Access granted by this password expires two hours after the password has been entered and
the user is returned to the CL0 level.
To Next Page
Loading...
