Xerox Phaser 3330

Troubleshooting
Xerox Internal Use Only Phaser 3330 and WorkCentre 3335/3345
Service Manual
2-97
10-300 Fuser Unit Fault Off
12-100 Entrance Motor Off
12-110 Exit Motor Off
12-200 Paddle Motor Off
12-300 Front Jog Home Off
12-310 Front Jog Stand Off
12-320 Rear Jog Home Off
12-330 Rear Jog Stand Off
12-400 Support Finger Home Off
12-410 Support Finger Stand Off
12-500 Ejector Motor Off
12-600 Stacker Down Off
12-610 Stacker Up Off
12-700 Stapler Off
12-800 Entrance Sensor Low
12-805 Exit Sensor Low
12-810 Paddle Home Sensor Low
12-815 Front Home Jog Sensor Low
12-820 rear Jog Home Sensor Low
12-825 Support Finger Home Sensor Low
12-830 Ejector Home Sensor Low
12-835 Ejector Encoder Sensor Off
12-840 Stacker Top Sensor Off
12-845 Stacker Bottom Switch Off
12-850 Staple Home Sensor Off
12-855 Staple Ready Sensor Off
12-860 Low Staple Sensor Off
12-865 Paper Detector Sensor Off
12-870 Finisher Door Sensor Off
12-875 IOT Set Sensor Off
12-880 Duplex Paper Sensor Off
Chain-Link Component Name State (Default)