Xerox Phaser 3330 Service Manual

General Information
Phaser 3330 and WorkCentre 3335/3345 Xerox Internal Use Only
Service Manual
1-10
Regulatory
Xerox has tested this product to electromagnetic emission and immunity standards. These standards
are designed to mitigate interference caused or received by this product in a typical office
environment.
European Union
The CE mark applied to this product symbolizes Xerox’s declaration of conformity with the following
applicable Directives of the European Union as of the dates indicated:
February 26, 2014: Low Voltage Directive 2014/35/EU
February 26, 2014: Electromagnetic Compatibility Directive 2014/30/EU
March 9, 1999: Electromagnetic Compatibility Directive 99/5/EC
This product, if used properly in accordance with the user's instructions, is neither dangerous for the
consumer nor for the environment.
To ensure compliance with European Union regulations, use shielded interface cables.
A signed copy of the Declaration of Conformity for this product can be obtained from Xerox.

Xerox Phaser 3330 Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Print Resolution	Up to 1200 x 1200 dpi
First Page Out Time	As fast as 6.5 seconds
Monthly Duty Cycle	Up to 80, 000 pages
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	850 sheets
Processor Speed	600 MHz
Memory	256 MB
Paper Output Capacity	150 sheets
Print Languages	PCL 5e, PCL 6, PostScript 3
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Maximum Paper Size	8.5 x 14 in (Legal)
Weight	10.6 kg