Xerox Phaser 3330 Service Manual

Parts Lists
Phaser 3330 and WorkCentre 3335/3345 Xerox Internal Use Only
Service Manual
5-2
Serial Number Format
Changes to Xerox products are made to accommodate improved components. When ordering parts
include this information:
• Component's part number
• Product type or model number
• Serial Number of the printer
The serial number is located on the right-side frame near the Fuser.
The nine-digit serial number uses the format PPPRSSSSS or MMMSSSSSSc.
• PPP = Three digit alphanumeric product code
• MMM = Three digit numeric manufacturing location code
• R = Single digit numeric revision digit, 0-3. To be rolled when the ending serial number is reached
or when a major product change occurs.
• SSSSS(S) = Five or six digit numeric serial number based on the following table. The serial
numbers are reset only when the ending number is reached or when the revision number is rolled.
• c = Check digit (correct number from check digit algorithm)
Product Code Location Code Product
9BR 338 Phaser 3330_DN, 110V Engine
2BT 338 Phaser 3330_DN, 220V Engine
9BR 338 Phaser 3330_DNM, 110V Engine
2BT 338 Phaser 3330_DNM, 220V Engine
5BT 338 WorkCentre 3335_DN, 110V Engine
5BT 338 WorkCentre 3335_DNM, 110V Engine
6BT 338 WorkCentre 3335_DN, 220V Engine
6BT 338 WorkCentre 3335_DNM, 220V Engine
3BT 338 WorkCentre 3345_DN, 110V Engine
4BT 338 WorkCentre 3345_DN, 220V Engine
3BT 338 WorkCentre 3345_DNM, 110V Engine
4BT 338 WorkCentre 3345_DNM, 220V Engine
Product Starting Serial Number Ending Serial Number
Phaser 3330DN, 110V Engine 9BR 530000 9BR 559999
Phaser 3330DN, 220V Engine 338 560000x 338 699999x
Phaser 3330DNM, 110V Engine 9BR 371501 9BR 396500
Phaser 3330DNM, 220V Engine 338 460000x 338 529999x

Xerox Phaser 3330 Specifications

General

Brand	Xerox
Model	Phaser 3330
Category	Printer
Language	English