Xerox Phaser 3330 Service Manual

General Information
Xerox Internal Use Only Phaser 3330 and WorkCentre 3335/3345
Service Manual
1-27
Print Process
Toner Cartridge
This printer uses a Laser Scanning Unit (LSU), Toner Cartridge and OPC Drum Cartridge, Transfer Roller,
and Fuser for mono printing. The Toner Cartridge consists of the toner supply and is transferred to the
OPC Drum Cartridge for development.
• Operating condition: Temp 10 ~30
° C (50~86° F), Humidity 20~85% RH
• Developing Method: Non magnetic single element contact method
• Toner: Non magnetic, single element toner
• The life span of toner (ISO 19752 pattern / A4 standard)
– Initial toner: 2.6K (Sold)
– Initial toner 11.0K (Metered)
– For Replacement Cartridge information refer to Xerox Supplies and Accessories.
• Toner Residual Sensor: Dot count with CRUM(CRU Monitor)
• OPC Cleaning: Collect the toner with cleaning blade
• Handling of wasted toner: Collect wasted toner in the cleaning frame
• Toner Cartridge: CRUM identifier.
Toner Cartridge Components
Item Item
Charge Roller Supply Roller
Cleaning Blade Charge Cleaning Roller
Doctor Blade Agitator 1
Developer Roller Agitator 2
s3320-240
Charge
Roller
Drum Cartridge
Drum OPC
Laser Unit
Doctor Blade
Charge Cleaning Roller
Cleaning
Blade
Paper
Path
Pressure
Roller
Heat Roller
Transfer
Roller
Developer Roller
Supply Roller
Agitator 1
Agitator 2
Fuser

Xerox Phaser 3330 Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Print Resolution	Up to 1200 x 1200 dpi
First Page Out Time	As fast as 6.5 seconds
Monthly Duty Cycle	Up to 80, 000 pages
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	850 sheets
Processor Speed	600 MHz
Memory	256 MB
Paper Output Capacity	150 sheets
Print Languages	PCL 5e, PCL 6, PostScript 3
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	Letter, Legal, Executive, A4, A5
Maximum Paper Size	8.5 x 14 in (Legal)
Weight	10.6 kg