Xerox Phaser 3330 Service Manual

Wiring Data
Phaser 3330 and WorkCentre 3335/3345 Xerox Internal Use Only
Service Manual
7-4
Phaser 3330 Main PWB Connector Designators
Connectors Description
CN1 Front USB Connector to Main PWB
CN2 Paper Outbin Full Sensor to Main PWB
CN3 Fuser Thermistor to Main PWB
CN4 Developer Unit CRUM to Main PWB
CN6 Empty Sensor to Main PWB
CN6 Registration Sensor to Main PWB
CN6 Feed Sensor to Main PWB
CN8 HVPS to Main PWB (24VDC and 3.3VDC)
CN11 SMPS input from SMPS PS (5VDC and 24V1)
CN14 Main PWB to Main Fan
CN15 Main PWB to Rear
CN17 Main PWB to Laser Scanning Unit (LSU)
CN18 Cover Open Sensor to Main PWB
CN19 MP Clutch and MP Sensor to Main PWB
CN20 Network Interface Connection to Main PWB
CN21 Main PWB USB Bus to Monitor
CN26 Main PWB to SMPS (Fuser)
CN27 Exit Sensor to Main PWB
CN28 Ambient Temperature Sensor to Main PWB
CN30 Main PWB to SMPS Fan
CN31 Main PWB to Main Motor, Pickup Clutch and Regi Clutch
CN32 Main PWB to SD Card
CN33 Main PWB to WNPC
CN34 Main PWB to Operator Control Panel
CN35 Main PWB to Optional Tray 2 Unit
CN37 Main PWB to Card Reader (rear)

Xerox Phaser 3330 Specifications

General

Brand	Xerox
Model	Phaser 3330
Category	Printer
Language	English