1-6
FEATURES
GEN
INFO
NOTE:
NOTE:
To set the shift timing indicator light activation function
S The indicator light activation function can be set between 10,000 and 16,000 r/min.
S From 10,000 r/min to 12,000 r/min, the indicatar light can be set in increments of 500 r/min.
S From 12,000 r/min to 16,000 r/min, the indicatar light can be set in increments of 200 r/min.
1. Push the “RESET” button to select the desired engine speed for activating the indicator light.
2. Push the “SELECT” button to confirm the selected engine speed.
The control mode changes to the shift timing indicator light deactivation function.
To set the shift timing indicator light deactivation function
S The indicator light deactivation function can be set between 7,000 and 12,000 r/min in increments of
500 r/min.
S Be sure to set the deactivation function to a higher engine speed than for the activation function,
otherwise the shift timing indicator light will remain deactivated.
1. Push the “RESET” button to select the desired engine speed for deactivating the indicator light.
2. Push the “SELECT” button to confirm the selected engine speed.
The control mode changes to the shift timing indicator light brightness function.
To adjust the shift timing indicator light brightness
1. Push the “RESET” button to select the desired indicator light brightness level.
2. Push the “SELECT” button to confirm the selected indicator light brightness level. The multi-function
display will return to the odometer, tripmeter or clock mode.
To Next Page
Loading...
Need help?
General
