Yamaha YZF-R6T User Manual

CHAS
36
EAS00652
DISASSEMBLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Remove:
• cap bolt
(from the damper adjusting rod)
• spacer
•nut
a. Press down on the spacer with the fork
spring compressor .
b. Install the rod holder between the nut
and the spacer .
N
O
TE:N
O
TE:
Use the side of the rod holder that is marked
“B”.
c. Loosen the nut.
d. Remove the cap bolt.
e. Remove the rod holder and fork spring
compressor.
WARNING
The fork spring is compressed.
f. Remove the spacer and nut.
2. Drain:
• fork oil
N
O
TE:N
O
TE:
Stroke the damper rod several times while
draining the fork oil.
3. Remove:
• dust seal
• oil seal clip
• oil seal
•washer
(with a flat-head screwdriver)
CAUTION:
Do not scratch the inner tube.
Fork spring compressor
90890-01441, YM-01441
Rod holder
90890-01434, YM-01434
FRONT FORK
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk

Yamaha YZF-R6T Specifications

General

Brand	Yamaha
Model	YZF-R6T
Category	Motorcycle
Language	English