2-49
CABLE ROUTING
SPEC
1 Fuel pump assembly
2 Canister hose
3 Canister
4 Breather hose
5 Blance hose
6 Fuel tank drain hose
A Install the roll over valve until it contacts with the fuel
tank’s nipple.
B Install the O-ring with its lip pointed upward.
C Install the clip with its tab pointed in the upward
direction.
D Install the breather hose without projecting canister
nipple out of the breather hose.
E Install the clip with its tab pointed in the downward
direction.
For California
To Next Page
Loading...
