4-49
FRONT FORK
CHAS
NOTE:
CAUTION:
NOTE:
EAS00655
DISASSEMBLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Loosen:
S nut
1
2. Remove:
S cap bolt
2
(from the damper rod assembly)
3. Remove:
S damper adjusting rod
1
S washer
2
S spacer
3
S fork spring
4. Drain:
S fork oil
Stroke the damper rod
1
several times while
draining the fork oil.
5. Remove:
S dust seal
S oil seal clip
1
(with a flat-head screwdriver)
Do not scratch the inner tube.
6. Remove:
S damper rod assembly bolt
S copper washer
While holding the damper rod with the damper
rod holder
1
, loosen the damper rod assembly
bolt.
To Next Page
Loading...
