5-92
TRANSMISSION
ENG
10 Nm (1.0 mSkg, 7.2 ftSlb)
NOTE:
NOTE:
3. Install:
S shift fork “R”
1
and “L”
2
S drive axle
3
S shift fork guide bar
S shift drum retainer
S Install shift fork “L” into the groove in the 6th
wheel gear and shift fork “R” into the groove in
the 5th wheel gear on the drive axle.
S Make sure that the drive axle bearing circlip
a
is inserted into the grooves in the upper crank-
case.
9. Check:
S transmission
Rough movement ! Repair.
Oil each gear, shaft, and bearing thoroughly.
To Next Page
Loading...
