–7–
CABLE ROUTING
SPEC
1 Throttle cable (return side)
2 Throttle cable (pull side)
3 Starter motor lead
4 Coolant reservoir tank breather hose
5 Bracket 2
6 Sidestand switch lead
7 Oil level switch lead
8 A.C. magneto lead
9 Radiator fan motor lead
10 Fuel tank breather hose
11 Fuel tank drain hose
12 Coolant reservoir tank cover
13 Drive sprocket cover
14 Coolant reservoir tank
15 Canister hose (for CAL)
16 Canister (for CAL)
17 Balance hose (for CAL)
A Pass the main switch lead under the left handlebar
switch lead and then to the right side of the vehicle.
B Pass the throttle stop cable by the left side of the
side stand switch lead, oil level switch lead, A.C.
magneto lead and then to the right side of the ve-
hicle.
C Pass the fuel tank drain hose and fuel tank breather
hose inside of the reservoir tank breather hose, res-
ervoir tank hose and wire harness and then route it
by the out side of the starter motor lead.
D Pass the coolant reservoir tank hose outside of the
fuel tank drain hose and fuel tank breather hose.
E Pass the fuel tank drain hose, fuel tank breather
hose through the clamp of the coolant reservoir
tank.
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
To Next Page
Loading...
