EasyManua.ls Logo

YASKAWA L1000A - Operator Programming Errors

YASKAWA L1000A
522 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.6 Setup Procedure for Elevator Applications
YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual 141
Start-Up Programming &
Operation
4
Using a Battery for the DC Bus and 24 V Power Supply Unit Option for the Control Circuit
Follow the instructions when using a 24 V Power Supply Unit option for the control circuit and a battery for the main
circuit. The main circuit battery voltage must be higher than 48 Vdc for 200 V, 400 V, and 600 V class drives.
Yaskawa offers a 24 V Power Supply Option for the control circuit that is useful in applications unable to connect to a
backup battery greater than 250 V. Wiring instructions can be found in Figure 4.25 to Figure 4.27. For a more detailed
explanation of the 24 V Power Supply Option, refer to the manual provided with the option.
Wiring for CIMR-LU20008 to 20180, 40005 to 40112, and 50003 to 50077
Figure 4.20
Figure 4.25 Using a Battery for the DC Bus and 24 V Power Supply Unit Option for the Control Circuit
Operation Sequence
Starting Rescued Operation
1.
Open contactor B and wait at least 5 seconds.
2. Set the input terminal programmed for Rescue Operation (H1- = 55).
3. Close contactors A and C.
4. Set the Up/Down command.
Ending Rescue Operation
1.
After the car has stopped, open contactors A and C.
2. Clear the input terminal set for Rescue Operation (H1- = 55).
3. Wait at least 0.5 s and then close contactor B to return to operation with normal power supply.
-
CN19
1
4
W/T3
V/T2
U/T1
R/L1
S/L2
T/L3
B1
+2
+1
B2
SC
S3 to
S
8
5 s
0.5 s
24 Vdc
L1
L2
L3
L1000A
Magnetic Contactor Sequence
Battery for DC bus
DC bus power supply
Battery for
control circuit
H1-غغ = 55
(Rescue Operation)
200 V Class: 48 to 340 Vdc
400 V Class: 48 to 680 Vdc
600 V Class: 48 to 850 Vdc
Magnetic Contactor A
Magnetic Contactor B
Magnetic Contactor C
Control
circuit
Power s upply
24 V
Power
Supply
Unit
H1-غغ = 55
(Rescue Operation)
Magnetic Contactor B
Magnetic Contactor A
Magnetic Contactor C
YEA_common
SIEP_C710616_38F_5_0.book 141 ージ 015年11月9日 月曜日 午後3時36分

Table of Contents

Other manuals for YASKAWA L1000A

Related product manuals