9.1 Monitoring Product Information
9.1.1 Items That You Can Monitor
9-2
9.1
Monitoring Product Information
9.1.1
Items That You Can Monitor
The items that you can monitor in the SigmaWin+ Product Information Window are listed
below.
9.1.2
Operating Procedures
Use the following procedure to display the product information monitor dialog box.
• Select Read Product Information in the Menu Dialog Box of the SigmaWin+. The Read
Product Information Window will be displayed.
Monitor Items
Information on SERVOPACKs
• SERVOPACK model
• SERVOPACK software version
• SERVOPACK special specifications
• SERVOPACK serial number
• SERVOPACK manufacturing date
Information on Servomotors
• Servomotor model
• Servomotor serial number
• Servomotor manufacturing date
Information on Encoders
• Encoder model
• Rotary encoder resolution and linear encoder pitch resolution
• Encoder type
• Encoder software version
• Encoder serial number
• Encoder manufacturing date
Information on Option Modules
• Option Module model
• Option Module software version
• Option Module special specifications
• Option Module serial number
• Option Module manufacturing date
With the Digital Operator, you can use Fn011, Fn012, and Fn01E to monitor this information.
Refer to the following manual for the differences in the monitor items compared with the Sig-
maWin+.
Σ-7-Series Digital Operator Operating Manual (Manual No.: SIEP S800001 33)
To Next Page
Loading...
