YASKAWA SGDV-OCA05A

Revision History-1
Revision History
The revision dates and numbers of the revised manuals are given on the bottom of the back cover.
Date of
Publication
Rev.
No.
Section Revised Contents
March 2017 <3> Preface, 14.4 Partly revised.
4.4.3, 5.14.1 Addition: Information on SQ47 and SQ57 Linear Encoders from Magnescale Co., Ltd.
5.14.1 Addition: Information on LIC2100-Series and LC415 Linear Encoders from Heidenhain
Corporation.
5.14.1, 5.16.2 Addition: Information on RESOLUTE Linear Encoders from Renishaw PLC.
14.2.2, 15.1.2 Revision: Reference information
December 2016 <2> All chapters Addition: Information on SGM7E and SGM7F Direct Drive Servomotors
Revision: Information on SigmaWin+ procedures
Deletion: Information on SGLC Linear Servomotors
Preface Partly revised.
1.6.3, 4.4.2,
4.4.3, 5.14.1,
5.15, 6.8
Addition: Information on Rotary Servomotors with 24-bit batteryless absolute encoders.
2.1.1 Addition: Information on input current of control power supply
2.1.3, 4.2, 4.5 Revision: “Linear Servomotor overheat protection signal input” changed to “overheat
protection input.”
3.7 Addition: EMC installations for single-phase 200-VAC and single-phase 100-VAC mod-
els.
6.14, 8.12.3 Newly added.
9.2.2 Revision: Monitor items in the Status Monitor Window
Chapter 14 Addition: A.862 and A.93B
Chapter 15 Addition: Pn022, Pn475, Pn476, Pn61A, Pn61B, Pn61C, and Pn61D
Deletion: Pn52D
16.1.2 Addition: Un02F
Back cover Revision: Address
December 2015 <1> Front cover Revision: Format
All chapters Completely revised.
Back cover Revision: Address and format
December 2014
−
− First edition
MANUAL NO. SIEP S800001 70B <1>
Published in Japan December 2015
Date of publication
Revision number