Yealink SIP-T58V/A

Administrator’s Guide for SIP-T5 Series Smart Media Phones
342
Parameters
Permitted Values
Default
Phone User Interface:
Settings->Features->Call Forward->AccountX->No Answer Forward->No Answer
Forward
account.X.timeout_fwd.target
(X ranges from 1 to 16)
String within 32
characters
Blank
Description:
Configures the destination number of the no answer forward for account X.
Example:
account.1.timeout_fwd.target = 3603
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1 (Custom).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->Target
Phone User Interface:
Settings->Features->Call Forward->AccountX->No Answer Forward->Forward To
account.X.timeout_fwd.timeout
(X ranges from 1 to 16)
Integer from 0 to
20
2
Description:
Configures ring times (N) to wait before forwarding incoming calls for account X.
Incoming calls will be forwarded when not answered after N*6 seconds.
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1 (Custom).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->After Ring Time(0~120s)
Phone User Interface:
Settings->Features->Call Forward->AccountX->No Answer Forward->After Ring Time
account.X.timeout_fwd.on_code
(X ranges from 1 to 16)
String within 32
characters
Blank
Description:
Configures the no answer forward on code to activate the server-side no answer forward
feature for account X.
The IP phone will send the no answer forward on code and the pre-configured destination
number (configured by the parameter “account.X.timeout_fwd.target”) to the server when
you activate no answer forward feature for account X on the IP phone.
Example:
account.1.timeout_fwd.on_code = *76