Yealink SIP-T58V/A

Configuring Advanced Features
343
Parameters
Permitted Values
Default
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1 (Custom).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->On Code
Phone User Interface:
Settings->Features->Call Forward->AccountX->No Answer Forward->On Code
account.X.timeout_fwd.off_code
(X ranges from 1 to 16)
String within 32
characters
Blank
Description:
Configures the no answer forward off code to deactivate the server-side no answer
forward feature for account X.
The IP phone will send the no answer forward off code to the server when you deactivate
no answer forward feature for account X on the IP phone.
Example:
account.1.timeout_fwd.off_code = *77
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1 (Custom).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->Off Code
Phone User Interface:
Settings->Features->Call Forward->AccountX->No Answer Forward->Off Code
features.forward.emergency.enable
0 or 1
0
Description:
Enables or disables the incoming calls from some authorized numbers not to be
forwarded when the call forward feature is enabled.
0-Disabled
1-Enabled
Web User Interface:
Features->Forward&DND->Forward->Forward Emergency
Phone User Interface:
None
features.forward.emergency.authorized_numb
er
String within 511
characters
Blank
Description:
Configures the authorized numbers not to be forwarded even if call forward feature is