Yealink SIP-T58V/A - Page 579

Configuring Advanced Features
557
Parameters
Permitted Values
Default
account.X.outbound_proxy.Y.address
(X ranges from 1 to 16, Y ranges from 1 to 2)
IP address or
domain name
Blank
Description:
Configures the IP address or domain name of the outbound proxy server Y for account X.
Example:
account.1.outbound_proxy.1.address = 10.1.8.11
Note: It works only if the value of the parameter “account.X.outbound_proxy_enable” is set
to 1 (Enabled).
Web User Interface:
Account->Register->Outbound Proxy Server Y
Phone User Interface:
Settings->Advanced (default password: admin) ->Accounts->Outbound ProxyY
account.X.outbound_proxy.Y.port
(X ranges from 1 to 16, Y ranges from 1 to 2)
Integer from 0 to
65535
5060
Description:
Configures the port of the outbound proxy server Y for account X.
Example:
account.1.outbound_proxy.1.port = 5060
Note: It works only if the value of the parameter “account.X.outbound_proxy_enable” is set
to 1 (Enabled).
Web User Interface:
Account->Register->Outbound Proxy Server Y->Port
Phone User Interface:
None
account.X.fallback.redundancy_type
(X ranges from 1 to 16)
0 or 1
0
Description:
Configures the registration mode for the IP phone in fallback mode.
0-Concurrent Registration
1-Successive Registration
Note: It is not applicable to outbound proxy servers.
Web User Interface:
None