Troubleshooting
711
To configure the URL of the provisioning server via web user interface:
1. Click on Settings->Auto Provision.
2. Enter the URL of the FTP/TFTP server in the Server URL field.
For example, if the IP address TFTP server is 192.168.1.20, then the URL
“tftp://192.168.1.20/” is where the IP phone exports the system log. For more information
on TFTP server, refer to
Yealink_SIP-T2_Series_T19(P)
E2_T4_Series_T5_Series_W5_Series_IP_Phones_Auto_Provisioning_Guide_V81
.
3. Click Confirm to accept the change.
To configure the phone to export the system log to an FTP/TFTP server via web user
interface:
1. Click on Settings->Configuration.
2. Mark the Ftp/Tftp server radio box in the Export System Log field.
3. Enter the upload period of the log files in the Upload Period field.
4. Select the desired post mode from the pull-down list of Post Mode.
5. Enter the limit size of the log files in the Append Limit Size field.
To Next Page
Loading...
