2N EasyGate IP - 2 N EasyGate IP User Manual; 5.11 Tester; ;

2N® EasyGate IP User Manual
111 / 127
•
•
•
•
•
•
•
•
5.10.5.2 Diagnostika
State – display the capture state.
Enabled – enable the diagnostic log capture.
Advanced Log – allow writing into log summary records.
Quota – set the maximum size of the diagnostic log archives.
Persistent – set that the diagnostic logs shall be preserved even after restart. If this
parameter is not allowed, the diagnostic logs will de deleted during the device restart.
Mask Selection – select a mask from a predefined database. The mask defines the values
to be recorded by diagnostics.
Mask Database – allow the masks to be downloaded and other masks to be uploaded.
5.11 Tester
5.11.1 I/O