2N® EasyGate IP User Manual
• Configuration – configure 2N Lift1 as via SMS by entering the required parameters (e.g.
by entering "011=xxxxxxxxxxxxx 012=xxxxxxxxxxxx 111=2 112=4" you make configuration
possible even if the service is disabled, enabled applies to incoming SMS only).
Press Upload configuration to upload the settings to 2N Lift1.
Press Save changes to save the changes.
SMS Command SMS Format
Configuration (CNF) L1 CNF <pwd> <p1>=<v1> [<p2>=<v2> [<p3>=<v3> …]]
Factory default reset (DEF) L1 DEF <pwd>
Profile selection (SET) L1 SET <pwd> <profile>
Device restart (RST) L1 RST <pwd>
Device information (INF) L1 INF <pwd>
Response (OK / ERR) L1 [OK|ERR] msg=<msg> cmd=<cmd> seq=<seq>
Description
<pwd> authorization password
<profile> profile number (0 - 19)
<pn> parameter number
<vn> numeric value or text value in brackets
<msg> detailed description
Successful
Busy
Invalid password (EGIP)
Invalid password (LIFT1)
•
•
The example below programs 2N Lift1 ALARM button memory 1 and 2 for the specified
phone numbers.
SMS format: L1 CNF 12345 011=00420222222222 012=00420111111111
The parameters must be separated with a space.
To Next Page
Loading...
Need help?
General
