2N EasyGate IP - 2 N EasyGate IP User Manual; 5.2.3 VoLTE; ;

2N® EasyGate IP User Manual
38 / 127
•
•
•
•
•
•
5.2.3 VoLTE
The VoLTE folder helps you set the VoLTE service, which is used for forwarding calls via the
VoLTE network. Make sure that this function is supported by your provider.
IMS – enable/disable call forwarding via LTE to the device.
IMS State– display the LTE call forwarding status.
Automatic MBN Selection – enable the automatic setting of the provider’s profile. The
profile list is displayed in the logs upon startup.
MBN Profile Name – set the provider’s profile name for the VoLTE function if Automatic
MBN selection is disabled.
Internal MBN Database – allow the parameter to use the profile updating 2N database
that is part of the firmware.
MBN File – make sure that the MBN file supplied by the provider for provider network
identification is sent to 2N before upload, where it will be added to the secure database of
accepted MBN files.