2N® EasyGate IP User Manual
5.4 SIP / Basic Setup
The SIP / Basic Setup folder helps you set all the required SIP credentials including the secure
SIP certificates.
Allow the SIP service and save the settings. Complete the phone number and authorization ID.
Enter the password paying attention to the lower/upper case. Complete the SIP server address.
This is the way to SIP registration. Check the SIP status on this folder or the Status folder, where
general information on the device is displayed.
•
Caution
The SIP registration is not performed in GSM (2G) due to the impossibility to
ensure the call quality via this network.