2N EasyGate IP - 2 N EasyGate IP User Manual; 5.6.3 Parameters; ;

2N® EasyGate IP User Manual
62 / 127
•
•
•
•
•
•
•
5.6.3 Parameters
The Parameters folder helps you change the intercom identification number or 2N Lift1 profile.
Status – display the status of the communication between 2NLift1 and2N EasyGate IP. 
OK – there is no communication between 2N EasyGate IP and 2N Lift1.
Busy – there is a communication between 2N EasyGate IP and 2N Lift1.
Error – the communication between 2N EasyGate IP and 2N Lift1 failed.
Intercom Identification Number– numerical ID of the lift (identical with parameter 974,
refer to Subs. 3.2 Overview of All Programming Functions in the 2N Lift1 User Manual).
Profile Number – user profile number (1–19) to be set for 2N Lift1.
Submitted Profile Number – user profile number currently uploaded to 2N Lift1.
Press Update to check the Profile number against the Submitted profile number. If there is a
match, do not set the profile but reset the Intercom identification number. If there is no match,
set both the profile and the Intercom identification number.
•
Caution
If a value is changed in a setting, you have to press Save changes before
performing further actions.
