2N EasyGate IP User Manual

2N® EasyGate IP User Manual
70 / 127
•
•
•
•
•
•
•
•
•
•
Feedbacks for Commands
L1 ERR Does not
Respond
2N Lift1 fails to hook off within 60s ringing timeout.
2N Lift1 picks up but fails to respond to the CPC programming
command.
2N Lift1 hangs up during programming.
2N Lift1 fails to respond to the communication commands
(WRITE_START, WRITE_CONFIRM, CRC_REQUEST).
L1 INF sn="<s/n>"
hw="<version
no.>" cust="<n>"
app="<fw no.>"
bl="<bl no.>"
vm="<voice
menu>"
Setting information:
sn – serial number
hw – hardware type
cust – user profile (1-19)
app – firmware version
bl – bootloader version
vm – voice menu
5.7 SMS / Setting
The SMS / Setting folder helps you enable and generally set the SMS sending function.
•
•
Caution
Multiple commands cannot be combined in a single SMS.
The maximum SMS length is 140–160 characters; if a setting outside the value
range is requested or an error occurs in the SMS, the setting change will not be
performed.


2N EasyGate IP Specifications

General

Brand	2N
Model	EasyGate IP
Category	Gateway
Language	English