2N EasyGate IP - 2 N EasyGate IP User Manual; 5.9.3 Battery Status Signaling; ;

2N® EasyGate IP User Manual
99 / 127
•
•
•
•
•
•
•
Continuous connection– enable the parameter to set that once established, the TCP
server connection shall remain active continuously. Once the parameter is allowed, the
TCP server connection attempt shall start automatically.
5.9.2.2 RS-232
RS-232 State – display the communication states:
Closed – serial line unfunctional,
Open – device listens on the serial line,
Active – server connection active.
Baud Rate – set the serial communication rate.
5.9.3 Battery Status Signaling
The Battery Status Signaling folder indicates any 2N
®
EasyGate IP battery error via 2N
®
Lift1,
which reports the error to the technical operation center using an operational call.
Enable Service – enable / disable the service.