2N EasyGate IP - 2 N EasyGate IP User Manual; 5.8.5 Ring; ;

2N® EasyGate IP User Manual
90 / 127
•
•
•
•
•
•
•
•

5.8.5 Ring
The Ring folder helps you set the ringtone parameters.
Frequency – set the ringing tone frequency. The default value is 50 Hz.
Modulation – set the ringing tone modulation in ms:
2000/4000
1000/4000
400/200/400/2000
1500/3500
2000/4000
Voltage – set the ringing tone voltage. The default value is 42 Vrms.
The factory default values are listed in Chapter 3. Tóny na telefonní lince – provozní tóny.