2N EasyGate IP - 2 N EasyGate IP User Manual; 5.6.6 Factory Reset; 5.6.7 SMS; ;

2N® EasyGate IP User Manual
66 / 127
•
•
•
•
•
•
•
•
•
Success – all settings OK.
Error – synchronization failed (refer to the 2N Lift1 state for the error type).
Saved State – display the saved 2N Lift1 – 2N EasyGate IP synchronization state.
Success – synchronization OK, state has been saved successfully.
Error – synchronization failed, state has not been saved.
Press Run to start 2N Lift1 – 2N EasyGate IP synchronization.
5.6.6 Factory Reset
The Factory Rest folder helps you reset the 2N Lift1 factory default values.
State – display the current 2N Lift1 factory reset state.
Success – FXS line is at relax and 2N Lift1 factory reset can be made.
Busy – FXS line has been seized and is communicating with 2N Lift1.
Error – 2N Lift1 factory reset cannot be made (refer to the 2N Lift1 state for the
error type).
Press Run to reset the 2N Lift1 factory defaults.
5.6.7 SMS
The SMS folder helps you enable and set programming of a connected 2N Lift1 lift intercom
using SMS. Having received an SMS with the programming request, 2N EasyGate IP establishes
connection with 2N Lift1 via a phone line and program it using the CPC protocol.