2N EasyGate IP - 2 N EasyGate IP User Manual; 4. Web Interface Login; 4.1. 2 N Elevator Center; 4.2 2 N EasyGate IP - Web Configuration Utility

2N® EasyGate IP User Manual
26 / 127
•
•
•
4. Web Interface Login
There are two login options for 2N
®
EasyGate IP, refer to the subsections below:
4.1. 2N® Elevator Center
4.2 2N® EasyGate IP – Web Configuration Utility
4.1. 2N® Elevator Center
2N
®
Elevator Center, a licensed cloud service, is used for 2N
®
EasyGate IP remote management
and web interface access. Contact your 2N distributor for the service access data. The user
account will be blocked for a minute following the third unsuccessful login attempt.
4.2 2N® EasyGate IP – Web Configuration Utility
To configure 2N
®
EasyGate IP without the 2N
®
Elevator Center cloud service, connect the
device to a PC via a USB cable using the 2N
®
EasyGate – Web Configuration Utility, available
for free download at 2n.com.2N
®
EasyGate IP – Web Configuration Utility is used for
automatic opening of the 2N
®
EasyGate IP web configuration page, which is connected via a
local USB port.
Installation
Double click to start the 2N_EasyGate_IP_Web_Configuration_Utility_Setup (.exe) file.
•
•
Caution
We recommend that the2N
®
Elevator Centercloud service is used for device
security and data protection.
Never provide the2N
®
Elevator Centerlogin data to other persons or services.
Keep this information safe and do not enter it on unreliable web pages.

•
Caution
Just a single active USB connection is supported. If multiple devices are
connected, keep just one 2N
®
EasyGate IP connected.
