2N EasyGate IP - 2 N EasyGate IP User Manual; 5.8 Telephony; Dialing; ;

2N® EasyGate IP User Manual
83 / 127
•
•
•
Starting Mode– select the digital input change mode that triggers SMS sending.
Activation Time – set a time period in miliseconds during which the digital input has to be
in the change mode to generate an event and send an SMS.
Next Event Time – set a time period in seconds during which no new event is generated
and no SMS is sent. A new event cannot be generated and SMS cannot be sent until this
timeout passes. In this way, repeated sending of SMS informing of a change on the digital
input is avoided.
The switches of the device connected to2N
®
EasyGate IPare connected using a 2-pin terminal
marked INPUT.
The SMS informing of a change on the device input are sent to the event recipient's phone
number.
5.8 Telephony / Dialing
The Telephony / Dialing folder helps you set the call dialing and outgoing call parameters.