2N EasyGate IP - 2 N EasyGate IP User Manual; 5.8.3 Dial Tone; 5.8.4 Busy Tone; ;

2N® EasyGate IP User Manual
87 / 127
•
•
•
•
•
5.8.3 Dial Tone
The Dial Tone folder helps you set the dial tone parameters.
Frequency 1– set the dial tone frequency. The default value is 452 kHz.
Frequency 2– set the dial tone frequency.
Modulation– set the dial tone modulation:
continuous
320/320/640/640
The factory default values are listed in Chapter 3. Tóny na telefonní lince – provozní tóny.
5.8.4 Busy Tone
The Busy Tone folder helps you set the dial tone parameters.