2N EasyGate IP - 2 N EasyGate IP User Manual; 5.8.2 Pulse Dialing; ;

2N® EasyGate IP User Manual
86 / 127
•
•
•
•
•
•
5.8.2 Pulse Dialing
The Pulse Dialing folder helps you set the pulse dialing parameters.
Delay between digits – set the time delay between the pulses. The default value is 100
ms.
Minimum pulse width – set the time value for the minimum pulse width. The default
value is 30 ms.
Minimum pulse width – set the time value for the maximum pulse width. The default
value is 60 ms.
Minimum delay – set the time value for the minimum inter-pulse delay. The default value
is 10 ms.
Maximum delay – set the time value for the maximum inter-pulse delay. The default value
is 80 ms.
Time to reset dial – set the timeout value for dialing clearing. I.e. line clearing time that is
considered on-hook and cancels the preceding dialing.